Hubfly spaceDocs
Console

Streams pricing & limits

Managed Streams is pay as you go and billed by the hour from your Hubfly space balance. You pay for the speed you reserve while a server runs and the bandwidth you send, plus processing only when Hubfly space re-encodes. Ingest is free, and a stopped server costs nothing.

Three meters

MeterPriceWhat counts
Speed41 µUSD per Mbps per hour, about $0.03 per Mbps a monthThe server's speed cap, for every hour it runs and is allowed to stream
Processing$0.004 per encoded Mbps-hourOutputs Hubfly space encodes: transcoding ladders, mixer programs, audio conversions, playlists that must re-encode
Bandwidth$0.004 per GB sent (1 GB = 10⁹ bytes)Viewers over HLS, LL-HLS, WebRTC and Icecast; restream destinations; RTMP and SRT pulls; thumbnails, status and embed pages
Ingest, Storage transfers, studio previewsFreeEverything publishers and pulls send in; recordings and playlists to and from Hubfly space Storage; previews in the Dashboard studio

The free allowance

Every owner, a personal account or an organization, gets this free, shared by all of its stream servers:

  • Speed: the first 25 Mbps of every hour. A single 25 Mbps server that runs all month costs nothing for speed.
  • Processing: 20 encoded Mbps-hours a month.
  • Bandwidth: 50 GB a month.

Speed

Speed is the most a server may send at once, to viewers and destinations together. Choose a preset or any value from 10 to 2,500 Mbps in steps of 5, and change it at any time: the new cap applies live and is billed from that hour. When traffic reaches the cap, the server slows delivery rather than dropping viewers, and raises a speed.throttled event and alert, so raise it before a big event.

SpeedµUSD per hourPer monthPer month after the free 25 Mbps
25 Mbps1,025$0.75$0.00
50 Mbps2,050$1.50$0.75
100 Mbps4,100$2.99$2.24
250 Mbps10,250$7.48$6.73
500 Mbps20,500$14.97$14.22
1,000 Mbps41,000$29.93$29.18
2,500 Mbps102,500$74.83$74.08

Monthly figures assume 730 hours of running. The free 25 Mbps is shared by all your servers, so the last column holds only if this is your only running server. The Dashboard and hubfly stream create show the price before you confirm, and that quote is authoritative; if prices changed in between, the request is refused and you get a fresh quote. Speed is not billed while a server is stopped or blocked for billing.

Processing

Each encoded output bills its configured video bitrate or the floor for its height and frame rate, whichever is higher:

Output height up toFloor at 30 fps or lessFloor above 30 fps
Audio only0.1 Mbps0.1 Mbps
3600.60.6
4801.01.0
7202.03.0
10804.06.0
14408.012.0
216012.018.0
  • A mixer program bills 1.5 × its output (decoding and compositing).
  • Each HTML graphics layer visible in the active scene adds 1.0 Mbps.
  • A rendition's own audio track is included.
  • Free: passthrough, packaging into HLS and WebRTC, restream copies, slates, and Storage videos whose codec, size and frame rate already match.
  • Converting an AAC or MP3 channel to Opus for WebRTC bills 0.1 Mbps only while a WebRTC viewer watches.

Each server has a processing cap (8 Mbps by default, up to 64). Outputs that would exceed it are not started and not billed: they show as rejected, with a processing.rejected event, until you raise the cap. Mixers start first, then channel ladders in channel order, then audio outputs.

Bandwidth

Bandwidth counts the bytes the server sends: to viewers, to restream destinations, to RTMP and SRT pulls, and for thumbnails, status and embed pages. As a rule of thumb, one viewer watching a 4 Mbps stream for an hour uses 1.8 GB. Usage & speed in the Dashboard and hubfly stream usage break it down by output class.

Worked examples

Each assumes it is the owner's only streaming that month, after the free allowance.

UseHow it adds upTotal
A 25 Mbps server, one hour runningAll speed inside the free 25 Mbps$0
OBS at 6 Mbps to YouTube, Twitch and Kick, 60 hours a month, 25 Mbps server3 × 6 Mbps × 60 h = 486 GB pushed; 436 GB billable × $0.004 = $1.744. Speed free; processing 0 (copies).≈ $1.74 a month
2-hour webinar: source plus a 720p/480p/360p ladder, 300 viewers averaging 3.5 Mbps, speed raised to 1,100 Mbps for the dayBandwidth 945 GB − 50 = 895 GB → $3.58. Speed (1,100 − 25) × 41 µUSD × 24 h = $1.06. Processing (3.0 + 1.4 + 0.8) × 2 h = 10.4 Mbps-hours, free.≈ $4.64
Storage videos looped 24/7 to YouTube at 4.5 Mbps1,478.25 GB − 50 = 1,428.25 GB → $5.71. Matching renditions play without re-encoding; speed free at 25 Mbps.≈ $5.71 a month
24/7 radio at 128 kbps: AAC passed through, one MP3 conversion, 100 listeners on averageBandwidth 4,204.8 GB − 50 → $16.62. Processing 0.1 × 730 = 73 − 20 free = 53 Mbps-hours → $0.21.≈ $16.83 a month
A 1 Gbps server running all month(1,000 − 25) × 41 µUSD × 730 h≈ $29.18 a month, plus bandwidth
A 720p30, 480p30 and 360p30 ladder at floor rates for 2 hours(2.0 + 1.0 + 0.6) × 2 h = 7.2 Mbps-hours, inside the free 20$0

For comparison, at 2026 list prices Restream Standard costs $19 a month and its looping add-on starts at $79 a month, and the two-hour webinar above costs about $36 on Cloudflare Stream and $40 on Mux.

Billing and your balance

The media node measures usage every minute; Hubfly space bills each complete hour, rounding every charge down to the micro-dollar. A price change applies from your next month: the prices in effect when your month's first billable hour is recorded hold for the rest of it.

When your balance (main plus promotional) reaches zero, or a project, budget group or sub-account reaches its monthly spend cap, your stream servers are blocked: encoders are refused, players and embed pages show a paused card, and speed is not billed. Topping up or raising the cap unblocks them within minutes. See Billing & Free Tier.

Recordings use Storage

Recordings and clips are stored in Hubfly space Storage and count against your Storage project's quota; moving them there costs no stream bandwidth.

Limits

ItemLimit
Stream servers per account5. Support can raise it.
Speed per server10–2,500 Mbps in steps of 5; at most 250 Mbps until the account has made a real deposit (STREAM_SPEED_LIMIT)
Processing cap per server0–64 Mbps, 8 by default
WebRTC sessions per server0–2,000, 200 by default
Inputs, mixers, channels, destinations50, 5, 20 and 50 per server
Playlists, schedules50 playlists of up to 500 items; 100 schedules
Playback keys, webhooks, storage links, custom domains10 each per server
Graphics200 per server, 500 MiB in total, 5 MiB per upload
Input bitrate0.1–80 Mbps per input (20 Mbps by default), never above the server's speed
Input mediaUp to 4096×2160, 60 fps, two audio channels, keyframes at least every 10 seconds
RenditionsH.264, up to 2160 lines and the source's size; 64–40,000 kbps video, 32–320 kbps audio
DVR window0–360 minutes
Viewers per channelUnlimited by default, or a cap of up to 100,000
Playback tokensAt most 31 days; test tokens from the Dashboard at most 24 hours
Studio sessions10 per server
Events and webhook deliveriesKept 7 days; viewer statistics kept 35 days

Not available yet

Live captions, DRM, server-side ad insertion (SCTE-35 markers pass through only), automatic failover between media nodes, a region picker and HTML graphics layers are not part of the current version.

Something unclear or out of date? Emailsupport@hubfly.spaceBack to top